Description
Multiply: Because one output just isn't enough! If you've got an RGB setup that requires more outputs from the same controller: these splitters are a life saver! Two Styles: These come available for old school "RGB" connectors, and the industry-standard JST connectors. Make sure you select the right one for your gear! Plug n Play: With these convenient splitters, there should be no need to cut/splice any of the small wiring associated with your RGB products. They are designed to be plug n play with various RGB accessories, and virtually everything sold by LEDC. Power: Beware that by splitting the outputs of your RGB Controller, you will be dividing the amount of power it's capable of providing amongst more accessories. What that means? If you're running too much gear off the same controller: you may experience some flickering. Solution: You just need another controller and there's no way around it.
Tech Specs
WIRE THICKNESS: 18AWG
LENGTH: Approx. 8in / 200mm
INSULATION: Braided TechFlex
Max Load: 10A @ 12V DC
Intensity: 570 Cd (Post Warm-Up) (5.7 lux @ 10m)
Input: Integrated Deutsch DT 2-Pin
Input Voltage: 9-18V DC
Power (Stabilized): 13.5w
Current: 1.5A @ 13.5V DC
Peak Luminosity (lm)(raw): 900lm
Dimensions: 81.0mm W, 49.8mm H (63.5mm w/ Bracket), 59.2mm D
Light Source: 2x Nichia NCSW131F (5700K)
Material: Makrolon LED PC (Lens), Powdercoated Die Cast Aluminum (Housing)
IP RATING: IP69K (Dust / High Pressure Water Resistant)
What's Included
Splitter: 1x JST 4P Male to JST 4P Female and JST 4P Female
Warranty: 2 Years
Compatibilities
INPUT TYPE: 4-Pin JST Male
OUTPUT TYPE: 2x JST 4-Pin Female
Prop65 Warning
Yes
DOT Compliant
Yes
Install Guide
Download Install Guide