Hand Crafted in the USA out of industry leading 1/4" thick steel making our buckets the strongest on the market
The conversion kit comes with both driver and passenger side coil buckets that will accept OEM or OEM Spec Gen 2 Ford Raptor Coil Overs.
*kit was designed to work with OEM Gen 2 Raptor coilovers..if aftermarket coilovers are used, limit straps may be required and modification may be required for res. hoses
*an aftermarket Upper Control Arm is recommended by not required
*F150 Raptor suspension components required for installation (i.e. LCA, Axles, Steering ect..)
A Full 2017-current Ford F150 Raptor suspension is required (not included) with the installation of these conversion buckets.
Ford Part Numbers: (part numbers are for reference only, Check with your local Ford Dealer to confirm)
Raptor Coil Spring (2 required): HL3Z-5310A
Raptor Super Cab Shock Absorber (2 required): HL3Z-18124A
Raptor Crew Cab Shock Absorber (2 required): HL3Z-18124-C
Raptor Upper Shock Mount (2 required): HL3Z-18A099-A
Raptor Upper Insulator (2 required): HL3Z-5415-A
Raptor Shock Upper Mount Nut (2 required): W715151-S440
Raptor Shock Mount to Frame Nut (6 required): W716771-S440
Left Upper Control Arm: HL3Z-3085-B
Right Upper Control Arm: HL3Z-3084B
Left Lower Control Arm: HL3Z-3079-B
Right Lower Control Arm: HL3Z-3078B
Lower Control Arm Shock Bolt (2 required): W712104-S900
Lower Control Arm Shock Nut (2 required): W715151-S900
Left Axle: HL3Z-3A427-A
Right Axle: HL3Z-3A428-A
Sway Bar End Link (2 required): HL3Z-5K483-B
Sway Bar Bushing (2 required) HL3Z-5484-B
Sway Bar: HL3Z-5482-B
Outer Tie Rod (2 Required): HL3Z-3A130-A
Raptor Left Brake Hose: HL3Z-2078-A
Raptor Right Brake Hose: HL3Z-2078-B
Raptor Wheel Sensor (2 required): HL3Z-2C204-A